Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

$600.00
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg
$347.99 - $685.99
Using the lightest materials available, the DURA-ACE R9150 levers offer better control and confidence in race conditions. The lightweight carbon hood material, enhanced shifter layout, and increased reach adjust range are the culmination of generations of SHIMANO's DI2 refinement. Better control and confidence in race conditions - Dedicated brake lever shape, stroke, contact point, stiffness and dedicated shift paddles Lightweight - Carbon composite plastic material of hood More intuitive, quicker shifting operation - More defined click feeling and ergonomic shifting lever position Customizable function to fit any riding style - Each switch has the option for multi-shift ON or OFF - E-TUBE PROJECT Optimum power transmitted with firm grip - Ideal ergonomic cover shape with better thickness & tenderness
$624.99
The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline
$282.99 - $611.99
Shimano Ultegra ST-R8070 Di2 hydraulic disc brake dual control levers. - Intuitive shifting operation - Updated features and more defined click feeling - Clearer separation between shift buttons support quick and precise shifting while operating with thick gloves - Customizable functionality to match the rider's style - Each switch has the option for multi-shift ON or OFF - E-TUBE PROJECT - Programmable function of ST top button remote switch for third party cycle computer and shifting - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Small bracket size improves ergonomics - Customize each SW for multi-shift on or off per SW through E-tube project App. - Greater reach adjust range and free stroke adjuster - Lightweight race-ready materials - More quick and precise shifting while operating with thick gloves - 2x11-speed - Average Weight: 180 grams
$536.99
Your time on the bike is precious, let Shimano make it even better. Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven SERVO-WAVE technology. The Di2 platform untethers the shifters while delivering fast and reliable wireless shifting. BR-R8170 disc brake caliper brings a new level of control to the road cycling world with improved modulation and a quicker initial braking point. Despite its smaller construction, the system is quieter than ever and easier to maintain. - The wireless connection provides a clean cockpit, enhancing the aerodynamic effect and easy maintenance - Wider pad clearance decreases brake noise - Maintenance-friendly bleeding process - Unparalleled ergonomic features, such as raised hood peaks on levers - Brake control is optimized with light and smooth lever action - Enhanced modulation thanks to an expanded braking control area - Compatible with wireless or wired connection
$687.60 $764.00 10% Off
The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way. - SRAM AXS-enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately
$600.00
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Cockpit the lightest one-piece bar/stem combo that passes our standards; at 255 grams (110 mm x 420mm). Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist Cockpit's round tube shape and tradition bend respect tried and true forms, but the optimized composite layup and internal cable routing are decidedly modern. Available in 10 sizes, there's one that will fit you perfectly. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - Bend: Tradition radius ( 125mm Drop / 75mm Reach) - Clamp Diameter: 31.8 - Compatibility: Shimano, SRAM, Campagnolo; Di2 and EPS - Material: Advanced carbon composite - Sizes: 400 mm x 80/90/100mm; 420mm x 90/100/110/120mm; 440mm x 110/120/130mm - Stem Angle (Rise): 6-Degrees - System Weight Limit: 275lbs / 125kg - Weight: 255 grams (110 mm x 420 mm)
$525.00
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug
$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug
$565.00
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup. - 12mm thru-axle, 100mm spacing - 700c x 42mm or 650b x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24 - Includes thru-axle and Whisky Parts Co. compression plug - Brake Mount: Flat Mount 140 - Material: Carbon - Weight: 526g - Steerer Type: Tapered - Offset/Rake: 45 - Steerer Tube Length: 350mm - Axle to Crown Length: 395mm - S.H.I.S. Crown Race Diameter: 40 - S.H.I.S. Stem Clamp Diameter: 28.6 - Fork Minimum Rotor Size: 140 - Fork Maximum Rotor Size: 160
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
$540.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
$565.00
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders. - 12 x 100mm thru-axle - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700c x 51mm or 650b x 61 mm max tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru axle and Whisky Parts Co. compression plug
$525.00
A thoughtful complement to the Whisky No. 9 MTN Boost LT Fork, this short-travel offering is just the piece for transforming hardtail racers into fully rigid cross-country champs. Lightweight carbon construction, a tapered steerer, and thru-axle dropouts promise dependable strength and steering. - Lighter and stiffer than a suspension fork, the MTN Boost ST Fork is long enough to replace forks with 110–120mm of travel - 485mm axle to crown - Boost 110mm spacing with clearance for 29 x 3.0” or 27.5 x 3.0” tires - Room for up to 180mm rotor - Whisky No.9 Thru Bolt and compression plug included
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$525.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
$594.99
- The stiffest and most aero integrated handlebar and stem system - All carbon construction - Di2 compatible with integrated junction box compartment and wiring conduits - Compact 125mm drop, 80mm reach - 395g
$696.99
- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Low Profile Rear Derailleur Design - Shimano Shadow Rd - Race Endurance For Less Damage In Crush - Maintains Compact And Smooth Appearance - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T
$633.00
The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit. - Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool - The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch - Rear derailleur is compatible with 10-50t and 10-52t cassettes - The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App
$587.00
SRAM GX Eagle drivetrains are engineered for optimal performance. Eagle drivetrains are designed, tested, and proven to deliver durable performance for all riders. Eagle technology provides an expanded, optimum gear range and is 100-percent compatible with all levels of SRAM Eagle drivetrain systems. - The GX crankset is engineered for complete chain control with each tooth precisely designed to work seamlessly with the chain’s inner and outer links - The GX Eagle rear derailleur gets the job done with an updated cage architecture that improves chain management and is compatible with both 10-52T and 10-50T cassettes - The XG-1275 10-52T cassette offers expanded 520% gear range and features SRAM's Full Pin technology, making it both lightweight and durable - The trigger shifter puts total control of your gear selection into the thumb of one hand - GX Eagle chain for smooth and efficient shifting - DUB bottom bracket sold separately
$587.00
SRAM GX Eagle drivetrains are engineered for optimal performance. Eagle drivetrains are designed, tested, and proven to deliver durable performance for all riders. Eagle technology provides an expanded, optimum gear range and is 100-percent compatible with all levels of SRAM Eagle drivetrain systems. - The GX crankset is engineered for complete chain control with each tooth precisely designed to work seamlessly with the chain’s inner and outer links - The GX Eagle rear derailleur gets the job done with an updated cage architecture that improves chain management and is compatible with both 10-52T and 10-50T cassettes - The XG-1275 10-52T cassette offers expanded 520% gear range and features SRAM's Full Pin technology, making it both lightweight and durable - The trigger shifter puts total control of your gear selection into the thumb of one hand - GX Eagle chain for smooth and efficient shifting - DUB bottom bracket sold separately
$690.00
The SRAM RED 1 AXS crankset features exceptional 1x drivetrain design. It provides the simplicity and tighter gearing range that is well-suited for road racing and riding in flatter terrain, where a wide range would go unused. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter. - Single-ring drivetrain simplifies functionality and reduces weight - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
$728.00
The SRAM RED 1 AXS crankset features exceptional 1x drivetrain design. It provides the simplicity and tighter gearing range that is well-suited for road racing and riding in flatter terrain, where a wide range would go unused. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter. - Single-ring drivetrain simplifies functionality and reduces weight - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
$743.00
The SRAM RED 1 AXS crankset features exceptional 1x drivetrain design. It provides the simplicity and tighter gearing range that is well-suited for road racing and riding in flatter terrain, where a wide range would go unused. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter. - Single-ring drivetrain simplifies functionality and reduces weight - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
$690.00 - $743.00
Triathlon. Time Trial. Cyclocross. Some disciplines are made for 1x. And while SRAM's X-Range 2x set up has integrated much of the simplicity of a 1x system, there are still times when a single ring is best. The SRAM RED 1 crankset offers the most demanding racers the right mix of features—aerodynamics, durability, and simplicity. - Single-ring drivetrain simplifies functionality and reduces weight - 48 and 50t variants feature direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Version: D1
$743.00
The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon
$749.00
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Ceramic - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$538.40 - $673.00 $673.00 Up to 20% Off
Fully wireless electronic shifting. Fully hydraulic disc braking. The SRAM RED eTap AXS HRD shift-brake system is the future. And the future is custom. AXS enabled and easily personalized for hand size and reach, this is the best shifting and braking experience — for all riders. - AXS-enabled for easy personalization - Simple and intuitive eTap shift logic - Personalize for your hands and preferences using the Contact Point Adjustment and separate Reach Adjust with HydroHC brake platform - Newly textured shift paddles and hoods for a better feel - Two ports for Blips on each lever - Bleeding Edge technology for easy and clean brake bleeds - Available in flat mount and post mount caliper options
$698.00
The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
Page 1 of 4 Next page